refinishing studio.
Currently booking June 2026 07858 637015 Get a quote
UPVC respray · South Wales

Tired UPVC, transformed. Without replacement.

Windows, doors, conservatories, fascias, garage doors. Hand-finished to a factory standard, on your home, in one to two days.

UPVC respraying project
UPVC
Tired UPVC, transformed. Without replacement.
What we respray

Every external UPVC surface on your home.

Windows

Front doors

Back doors

Composite doors

Conservatories

Garage doors

Fascias and soffits

Drainpipes and gutters

Substrates we work with

If it's plastic and outside, we can respray it.

Almost any modern UPVC is suitable, plus composite doors, fibreglass garage doors, and aluminium-clad frames.

Standard UPVC

Composite doors

Aluminium-clad UPVC

Fibreglass garage doors

Plastic fascias and soffits

Finish

Matt, satin, gloss.

We default to matt for UPVC. It's contemporary, low-maintenance, and pairs with everything.

Matt

5% sheen. Soft, contemporary, doesn't show fingerprints. The most-asked finish in 2026.

Satin

30% sheen. Subtle reflectivity. Mid-ground between matt and gloss.

Gloss

70% sheen. High reflectivity, easy to clean. Best on flat slab panels and front doors.

Colour

Anthracite, black, sage, cream. Or any RAL you can name.

These are our most-asked colours. We colour-match anything else on-site from a sample.

Anthracite grey

RAL 7016

Jet black

RAL 9005

Chartwell green

BS 12-B-29

Cream

RAL 9001

Sage

RAL 7033

Off-black

RAL 9011

Window grey

RAL 7040

Bone

RAL 9010

Custom RAL

Any RAL

Process

Six steps. One to two days on site.

Every step done properly. Most failures in this trade come from skipping prep. We don't.

  1. Survey

    We measure, photograph, and quote within 48 hours.

  2. Prep

    Mask, sand, degrease. Hardware removed where needed.

  3. Prime

    Two-part adhesion primer keyed to your substrate.

  4. Spray

    Three coats Kolorbond, applied wet-on-wet for a factory finish.

  5. Cure

    24-hour cure window. Hardware refitted, glass cleaned.

  6. Sign-off

    You walk the job with us. Pay only when you're happy.

Specialist UPVC services

Every UPVC surface, covered.

Looking for something specific? We have dedicated pages for each UPVC surface we respray, plus an honest cost guide.

FAQ

UPVC respraying. Answered properly.

Short, honest answers. If we've missed yours, we'll reply in thirty minutes.

Can any UPVC be resprayed?
Almost any. The substrate has to be sound. We turn down frames with structural failure, broken hinges that can't be re-set, or rot in the surrounding render. We'll tell you straight after the survey.
Will it look like spray paint?
No. Properly prepped UPVC sprayed in three coats of Kolorbond looks factory-finished. The Kolorbond product is the same one used by frame manufacturers for their pre-coloured ranges.
How long does a UPVC respray take?
A whole-house standard job is one to two days on site. A single front door is half a day. Conservatories add a day.
Can I open my windows during the job?
Not on spray day. We mask the seals shut. From the morning after, they open as normal.
Do you respray window seals and gaskets?
We mask them off and leave them. The original rubber gaskets are designed to flex and seal, paint on them fails fast. We spray everything else around them.
What's the best UPVC colour right now?
Anthracite grey (RAL 7016) is the request we get most often. It pairs with red brick, render, and stone. Black is climbing fast on new-builds. Sage and cream are coming back for period properties.
Can you respray bi-fold doors and patio doors?
Yes. Tracks get masked, frames sprayed, doors removed where they swing out for full coverage.
Do you do garage doors?
Yes. Up-and-overs, sectionals, and roller doors. Same Kolorbond system, same five-year guarantee.
Will respraying UPVC void any warranty?
If your windows are under a manufacturer warranty, check the small print. Most UPVC warranties cover structural and sealed-unit failure, not surface colour, so a respray usually doesn't affect them. We don't drill, weld, or modify the frame.
What's the difference between Kolorbond and standard paint?
Kolorbond is a UV-stable, two-pack, paint system specifically engineered for non-porous plastic substrates. Standard exterior paint isn't. That's the difference between a five-year guarantee and a one-year peel.
Can you spray my conservatory roof?
The frames yes, the polycarbonate or glass panels no. If the panels are tired, we'll point you at a replacement panel specialist rather than risk the wrong product on the wrong surface.
Does the weather matter?
Yes. We need above 8°C, under 80% humidity, no rain forecast for 24 hours. In Wales that's not every day. We book around the weather.
What does the prep involve?
Wash with industrial degreaser. Sand to key the surface. Wipe with isopropyl alcohol. Mask glass, seals, hardware. Apply two-pack primer. Then three coats of colour. The prep is 70% of the work.
Can I respray my UPVC myself?
You can buy the materials. The hard part is the masking, the application, and the curing. Without HVLP spray equipment and a controlled environment, the finish won't last. We've finished a lot of DIY jobs that didn't.
What if I don't like the colour after?
We do a sample panel before spray day. You sign it off on site. If something goes wrong after that, we come back inside the five-year guarantee and put it right.
Fast quote

For a fast quote, please send us:

Whole house, a single door, or fascias and guttering — the more we can see up front, the sooner we can come back with a useful number.

No pressure and no obligation — we'll simply let you know what's possible and what it would cost.

Next step

Let's see what your home could look like.

Send us a few photos and your postcode on WhatsApp for a fast, free quote. We reply within 30 minutes during business hours. Most written quotes are returned within 48 hours once we've received photos or completed a survey.